MH-ET LIVE Tiny88 : an Arduino Compatible development board
The MH-ET LIVE Tiny88 is an Attiny88 based micro-controller development board similar to the Arduino Nano, its a little cheaper but due to the to the micro-controller its a bit…
The MH-ET LIVE Tiny88 is an Attiny88 based micro-controller development board similar to the Arduino Nano, its a little cheaper but due to the to the micro-controller its a bit…
In this article we look at a GPS Shield which is based on the ublox’s NEO-6M receiver module. Lets look at some info about the NEO‑6 module. The NEO‑6 module…
Another shield that I recommend for beginners is the Easy module shield, you can see it in the images below. It is very similar to the open smart rich shield…
The OPEN-SMART Rich UNO R3 is an ATMEGA328P development board with many components on board and also has the ability to connect an existing Arduino shield to it, it is…
The first shield we will look at is the OPEN-SMART Rich Shield, this is a very useful shield which is ideal for beginners wishing to learn about the Arduino. Lets…
In this example we connect an Ethernet shield to an Arduino, we then connect a GY-21P sensor to this and we will display the readings on a webpage The GY-21P…
In this article we will connect an HDC1008 sensor and connect it to a Nokia 5100 shield. We will display the humidity and temperature in celsius on the display The…
In this example we will create a temperature meter using a mcp9808 sensor and display the readings on an LCD shield Lets look at the mcp9808 first The MCP9808 digital temperature…
In this example we look at an VEML6070 UV sensor and connect it to an Arduino UNO, the code example will not use any external libraries VEML6070 is an advanced…
This was a a simple board that I bought which basically consists of a red, yellow and green LED on a board, rather than buying seperate components and using a…