Home Arduino Shields

Arduino Shields

This page is a collection of shields that can be bought for your Arduino, we will review these shields and others elsewhere.


TFT 01 2.4″ LCD Shield Expansion Board Module for Arduino/2.4″ Mega Touch LCD Expansion Board Shield – $7.28

Brand: ChuangZhuo; Model: CZ01;Quantity: 1 Piece;Other Features: The TFT01 the LCD is operating at 3.3V, this can not be directly used in the standard– Arduino motherboard on top, so in order to make the TFT01 the LCD is compatible with the Arduino on the motherboard used in the standard, designed this section of TFT Shield, can be directly inserted in the Arduino on the motherboard use the TFT01 the LCD module.The TFR01 MEGA shield V1.0 supports both 16 bit mode. Because of Mega board have enough pins for using SD card and Touch function at the same time

KEYES L293D Motor Control Shield Motor Drive Expansion Board for Arduino – Blue – $8.61

Brand: KEYES; Model: N/A;Quantity: 1Features: Motor drive expansion board for Arduino;Specification: 2 x 5V servo motors (servos) port connected to the Arduino’s high-resolution high-precision timer – no jitter; Up to four bi-directional DC motor and 4-channel PWM speed (about 0.5% resolution); Up to 2 stepper motor control, single / two-step control, staggered or micro-step and the rotation angle control; 4-channel H-bridge: L293D chip every road and bridge to provide .0.6 A (peak 1.2A) current and with a thermal power protection, 4.5V to 36V; Pull-down resistor to ensure that the motor remains stopped on power; arge terminal terminals make it easier to wire (10 – 22AWG) and power; With the Arduino reset button; 2 terminal external power supply terminal to ensure the separation of logic and motor drive power; Compatible with Mega, Diecimila, & Duemilanove; Download easy-to-use Arduino software library rapid project development;

Application: Provide a full range of spare parts available to do-it-yourself enthusiasts the DIY; English Manual/Spec: Yes


MEGA Sensor Shield V2.0 Dedicated Sensor Expansion Board for Arduino – $8.85

Using PCB Immersion Gold processing technology – The motherboard will not only all digital and analog interface to the steering gear line order form extended out, but also ad hoc Bluetooth module communication interface, SD card module communication interface, APC220 RF communication interface module and RB URF V2.0 ultrasonic sensor interface – The independent expansion with more user-friendly convenience – Can simplify the circuit, easily be used to connect sensors, a sensor requires only a general 3P sensor wire (regardless of digital cable or analog cable)This is a must have board if you own an Arduino Mega

2 Channel Relay Shield Module for Arduino (XBee / BTBee Interface) – $12.99

Model: N/A; Quantity: 1Features: Capable of controlling 2 relays, with XBBee/BTBee, CC1101 and nRF24L01 wireless interface;Application: Used to control the lighting, electrical and other equipments; easy to expand with the Arduino board or other MCU board PIC, ARM and MSP430

Funduino Makey Touch Key USB SHIELD Analog Touch Keyboard for Arduino – $23.42

Brand: Funduino; Model: N/A; Quantity: 1 Piece;Other Features: Suitable for 2009 Uno UNOR3 LEONARDO controller; Working voltage: 5V; Interface: USB male; Packing List: 1 x Touch key USB shield7 x Cables (104cm, 4 red and 3 black)1 x USB male to male data cable (144cm);

KEYES Bluetooh Bee Extension Board (Works with Official Arduino Board) – Red + lack – $9.42

Brand: KEYES; Model: N/A; Quantity: 1Features: Bluetooth extension board compatible with Bluetooh Bee; Specification: Folding design makes it easy to use on ARDUINO development board and realize communication between the device and other bluetooth equipment;Application: Microcontroller wireless communication board; English Manual/Spec: https://app.box.com/s/riirv9iy8wigoel1k77i;Other: Arduino Xbee extension board is design for official Arduino products; hot swapping with 2 Xbee sockets; adding a voltage regulator IC and a switch for Xbee, you can keep all the original Arduino lead feet; with this module, you can realize communication between two or more Arduino, or between Arduino and PC

Relay Shield v0.9b 5V 4-Channel Relay Module for Arduino – (Works with official Arduino Boards) – $10.40

Brand: N/A; Model: Relay Shield v0.9b; Quantity: 1;Features: Relay Shield is a small current signal control module, can achieve single chip to control large power device; Widely use in singlechip home device; Can be plug to the main board which is compatible with Arduino; 4-channel relay, stand Arduino Shield interface; 3-M3 screw hole, easy to install; Driven by 5V / 3.3V normally open contact close; With red LED indicator onboard; Note: Please avoid the green terminal short-circuit by the housing as connecting with Arduino UNO main board; Specification: Power voltage: 4.75~5V; Power consumption (at 5V): 180mA; Opening and closing time per minute: 30 times; Every channel maximum convert voltage: AC 125V / DC 24V; Every channel maximum converts current: 3A;

Application: High performance expansion board; Arduino 4-channel relay module for Arduino;


Manolins Danger Multifunction Inputs and Outputs Shield Module for Arduino – Red – $35.85

Brand: Manolins; Model: danger; Quantity: 1;Features: The Danger Shield mounts on top of your Arduino or Arduino Pro and equips it with a variety of fun and useful inputs and outputs; The Danger Shield has so much potential; We can’t wait to see what you’re able to do with it;
1. Three linear slide potentiometers connected to the Arduino’s analog pins 0 through 2;
2. Two LEDs connected to digital pins 5 and 6 – PWM pins – so you can easily vary their brightness;
3. Three momentary push buttons connected up to the Arduino’s digital pins 10 through 12. Those lines will go low when the buttons are pressed;
4. A photocell and a temperature sensor, both with analog outputs, are connected to the analog pins 3 and 4, respectively;
5. An 8-bit shift register setup to control a blue 7-segment LED;
6. A buzzer – so you can get sound out of your Arduino;
7. Capacitive Touch pad – you can use the pad to sense touch; Specification: A buzzer, Capacitive Touch pad 3 linear slide potentiometers 3 linear slide potentiometers PWM pins A photocell and a temperature sensor; Application: The Danger Shield mounts on top of your Arduino or Arduino Pro and equips it with a variety of fun and useful inputs and outputs