• 8051 Code

    8051 7 Segment display program written in Basic

    While browsing through the mikroelectronika website and looking at available downloads, I noticed their Basic compilers for various microcontroller architectures. So after downloading the 8051 version and installing lets look…

  • 8051 Code

    8051 and 7 segment displays

    Its fairly straightforward to connect  a 7 segment display to your 8051 processor, in this example we will do this and show a code example which cycles through the numbers…

  • 8051 Code

    8051 and RGB LED example

    In this example we connect an RGB LED to our 8051. In this case we used an RGB LED breakout, this was a common anode device. The schematic below shows…

  • 8051 Code

    mikroC Pro and 8051 development

    Recently I purchased several 8051 type development boards from China, most of the examples were written in Keil. As a test I decided to see if i could get any…

  • 8051 Code

    8051 switch input example

    A very simple example that toggles a set of 8 LEDs based on whether a switch is pressed or not The switch is connected to Port 3.0, the LEDs are…

  • 8051 Code

    LED count down

    This is a hexadecimal counter using LEDs. It will start at 0xFF and count down 1   Code #include <reg52.h> void delay(unsigned int i); main() { unsigned char Num =…

  • 8051 Code

    8051 rotating LEDs examples

    Again using the ARm + 8051 development board Example 1 #include<reg52.h> void Delay(unsigned int t); void main (void) { unsigned char i; Delay(50000); P2=0x7f; while (1) { for(i=0;i<8;i++) { Delay(50000);…

  • 8051 Code

    Flashing leds 8051 example

    This example was written using Keil UV2, the board in question was a 8051/ARM development board that I purchased from China. The micro was a STC90C516RD+ The LEDs are connected…

Newer Posts
Older Posts